Floating pneumatic fender is safe and reliable in wide application range
Company Introduction:
Company long-term commitment to pneumatic rubber fender, yokohama, pneumatic fender, floating pneumatic fender product research and development, production and sales of pneumatic rubber fender, using natural rubber and styrene butadiene rubber, polybutadience rubber, such as synthetic rubber, rubber hard, more abrasion resistance and toughness, product use high quality materials and special explosion-proof technology, sightseeing along the outside, good wear resistance, aging resistance, air tightness, high intensity, long service life, high quality, and adopted the ISO9001: 2008 international quality management system certification and CCS, ABS, BV, DNV, GL, LR and other product quality certification, and for the national large construction enterprises and wharf protection to provide products and services.
Floating pneumatic fender features:
1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.
4, good economic performance, compared with the fender, belt fender economic performance is good, cost-effective, reliable quality. Belter Fender has undergone inspection from raw material purchasing, product ordering, product production and product inspection to ensure its quality.
Pneumatic ship fender structure:
Pneumatic ship fender is divided into: inner rubber layer, reinforced cord layer, outer rubber layer.
Function of inner adhesive layer: shape for fender, enhance air tightness and ensure no air leakage.
Enhance connection layer: improve the strength of the transverse fender, increase the tensile strength, increase the pressure.
Outer layer: improve the wear resistance of Marine fender, better protect the inflatable rubber fender body, prolong the service life
Floating pneumatic fender performance table:
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Picture of floating pneumatic fender
Product Tags:
|
|
D700mm*L1500mm Floating Yokohama Pneumatic Fender Safe Reliable Wide Application Images
|
