Pneumatic rubber fender ISO17357 standard 80KPa
Pneumatic rubber fender is the international popular ship fender products, the use of compressed air as a buffer medium, so that the ship has a more soft wall effect, has a large impact energy absorption, acting on the ship's area pressure is low, excellent impact fatigue resistance, easy installation and other advantages; Widely used in large oil tanker, liquefied gas ship, chemical ship, offshore platform, large dock, sea, etc.; Belter ship fender products are reliable.
Common dimensions and performance of pneumatic rubber fender:
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Instructions for operation and maintenance
1. The maximum deformation of the inflatable rubber fender in the use process is 60% (except for special ship type or special operation), and the use pressure is 50KPa-80KPa (the use pressure can be determined according to the user's ship type, tonnage size and near environment).
2, in use should pay attention to avoid sharp objects puncture and scratch; And timely maintenance and maintenance, in general 5- 6 months for a pressure test.
3. Check regularly whether the fender body is puncted or scratched. The surface objects in contact with the fender shall not have sharp protruding hard objects to prevent puncturing the fender. When the fender is in use, the cable or chain or wire rope hanging the fender shall not be knotted.
4. When the fender is not used for a long time, it should be cleaned and dried, filled with appropriate amount of gas, and placed in a dry, cool and ventilated place.
5. The fender should be kept away from heat, and should not contact with acid, alkali, grease and organic solvent.
6, do not pile up when not in use, do not pile up heavy objects on the fender.
Pneumatic rubber fender pressure test
Pneumatic rubber fender picture
Product Tags:
|
|
ISO17357 80KPa Pneumatic Rubber Fenders D330X L6500 Images
|
